Advertisement
5 Installation Procedure
◆
Make Cable Connections to the 24 V Power Supply Option
(PS-V10S)
If you are installing the PS-V10M 24 V Power Supply Option, proceed to
Connections to the 24 V Power Supply Option (PS-V10M) on page 24
1. Position the drive on its side or its back as shown in
connector ends 180 degrees.
2. Next, plug the unit connection cable into the black connector socket CN3-1 labeled "TO
POWER BOARD" on the 24 V Power Supply Option and plug the remaining cable into the
white connector socket CN3-2 labeled "TO CONTROLLER" on the 24 V Power Supply
Option.
Figure 15
Figure 15 Plugging the Connector into the 24 V Power Supply Unit (PS-V10S)
22
(connecting the power board)
YASKAWA ELECTRIC TOBP C730600 27B V1000 Option PS-V10 Installation Manual
Figure
15. Twist the cable with black
Twist 180°
Make Cable
Advertisement
