5 Installation Procedure
◆
Install the Option Cover to the Mounting Attachment
(PS-V10S / PS-V10M)
1. Align the two tabs on the inside edge of the 24 V Power Supply Option with the
corresponding slots on the mounting attachment and click the option cover into place.
Figure 19
Figure 19 Installing the Option Cover to the Mounting Attachment (PS-V10S)
Figure 20
26
Drive with PS-V10S
Figure 20 24 V Power Supply Option Properly Installed
YASKAWA ELECTRIC TOBP C730600 27B V1000 Option PS-V10 Installation Manual
Drive with PS-V10M