Advertisement
5 Installation Procedure
◆
Remove the Drives Cable Access Cover
The drive cable-access cover must be removed to allow access to drive connection sockets
prior to mounting the option to the drive.
1. Insert a flat-blade screwdriver blade into one of the slots on the drives cable-access cover
and gently pry up to loosen and remove the cover as shown in
Note: The cable access cover piece may be discarded.
Figure 8
18
Figure 8 Removing the Cable-access Cover on the Drive
YASKAWA ELECTRIC TOBP C730600 27B V1000 Option PS-V10 Installation Manual
Figure
8.
Advertisement
