Table of Contents
Advertisement
236
Using ConfigFree™ with your Toshiba Computer
Semi-Automatic Switch Feature
Semi-Automatic Switch Feature
The Semi-Automatic feature alerts you when the computer
connects to a Service Set Identifier (SSID) stored in a profile,
When the computer connects to the designated SSID, a
notification window appears. You can then click this window
to connect using the settings specified in the profile.
To use the Semi-Automatic Switch feature:
1
Right-click the
2
Click Auto Switch. The Auto Switch dialog box appears.
3
Select the Auto Switch (SSID) tab.
4
Select the profile to be automatically selected when the
SSID is detected, then click Add. The profile is moved to
the List of target SSIDs and profiles.
5
Repeat the previous step for each additional profile you
want to select.
6
Select Automatically switch profiles when connected
to this SSID.
7
Check Automatically switch profile when connected to
this SSID.
8
Click OK.
The computer is now configured to use the Semi-Automatic
Switch feature. When the computer connects to an SSID in a
profile, a display notification window appears. You can then
click Switch on the window to switch profiles. You can also
set the option for having the switch be automatic without the
need for a notification.
NOTE
Several profiles can be defined for a single SSID. In this case,
several notification windows are displayed. By clicking these
windows, you can switch to the profile for that location.
icon in the system tray.
Advertisement
Table of Contents
