Figure 34 Sdm Fw4 Components Facing Up; Figure 35 Removing The Two Back Screws From The Prpmc - Nortel 8660 SDM Installing

12 Turn the 8660 SDM over so that the components are facing up (see
Figure 34).

Figure 34 SDM FW4 components facing up

13 Use a Phillips screwdriver to remove the two screws that secure the back of
the PrPMC to the 8660 SDM (see

Figure 35 Removing the two back screws from the PrPMC

Chapter 4 Replacing a PrPMC 57
Figure 35).
Installing the 8660 Service Delivery Module (SDM)
11236EA
11212FA