Estimated Time To Replace A Disk Drive; Required Tools - Nortel 8660 SDM Installing

44 Chapter 3 Replacing the disk drives
3
4
5
6

Estimated time to replace a disk drive

The estimated time to remove a disk drive is fifteen minutes.
The estimated time to install a disk drive is fifteen minutes.

Required tools

You require the following tools to replace a disk drive: Phillips #0 or #1
screwdriver.
217314-B Rev 00
Use the
Set_console slot# mini slot#
(for example:
Set_console 3 1
b From the SDM console, enter
Repeat Step 2 for each disk drive for the following:
• SDM FW2 or FW4
• TPS4
• FW1-TPS1 or FW2-TPS2
Remove the installed 8660 SDM.
For instructions, see
Place the 8660 SDM on an antistatic bag or set it on an antistatic mat.
Remove the damaged disk drive (see
Install the replacement disk drive
).
/boot/halt
"Removing an 8660 SDM" on page
"Removing a disk drive" on page
(see"Installing a disk drive" on page
CLI command
32.
45).
47).