Return Of Material - Emerson Rosemount Analytical 1054B C Instruction Manual

MODEL 1054B C
9.1 GENERAL. To expedite the repair and return of
instruments, proper communication between the cus-
tomer and the factory is important. A return material
authorization (RMA) number is required. Call (949)
757-8500. The Return of Materials Request form is
provided for you to copy and use in case the situation
arises. The accuracy and completeness of this form
will affect the processing time of your materials.
9.2 WARRANTY REPAIR. The following is the proce-
dure for returning instruments still under warranty.
1. Contact the factory for authorization.
2. Complete a copy of the Return of Materials
Request form as completely and accurately as
possible.
3. To verify warranty, supply the factory sales order
number or the original purchase order number. In
the case of individual parts or sub-assemblies, the
serial number on the mother unit must be sup-
plied.
4. Carefully package the materials and enclose your
Letter of Transmittal and the completed copy of
the Return of Materials Request form. If possible,
pack the materials in the same manner as it was
received.
IMPORTANT
Please see second section of Return of
Materials Request Form. Compliance to
the OSHA requirements is mandatory for
the safety of all personnel. MSDS forms
and a certification that the instruments
have been disinfected or detoxified are
required.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SECTION 9.0

RETURN OF MATERIAL

5.
9.3 NON WARRANTY REPAIR.
1.
2.
3.
4.
Send the package prepaid to:
Rosemount Analytical Inc.
Uniloc Division
2400 Barranca Parkway
Irvine, CA 92606
Attn: Factory Repair
Mark the package: Returned for Repair
RMA# __________________
Model No. ______________
Contact the factory for authorization.
Fill out a copy of the Return of Materials Request
form as completely and accurately as possible.
Include a purchase order number and make sure
to include the name and telephone number of the
right individual to be contacted should additional
information be needed.
Do Steps 4 and 5 of Section 9.2.
NOTE
Consult the factory for additional infor-
mation regarding service or repair.
SECTION 9.0
RETURN OF MATERIAL
37