Emerson Rosemount Analytical 1054B C Instruction Manual page 23

MODEL 1054B C
MAIN FUNCTION (PRESS ONCE)
Displays - conductivity.
OUTPUT
Set Function (w/SELECT) - One point
PV
standardization of conductivity.
(PV= Process Variable)
Displays - process temperature
(°C or °F).
HOLD
Set Function (w/SELECT) - One point
TEMP
standardization of temperature.
Displays - Alarm 1 setpoint.
ZERO
Set Function (w/SELECT) - Sets
ALARM 1
Alarm 1 setpoint.
Displays - Alarm 2 setpoint.
F.S.
Set Function (w/SELECT) - Sets
ALARM 2
Alarm 2 setpoint.
Two Point temperature slope calibra-
tion.
CAL
16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
TABLE 3-1. Key Description
SECOND FUNCTION (PRESS TWICE QUICKLY)
Displays - current output (mA or % full
scale).
Set Function (w/SELECT) - Simulates cur-
rent output.
Initiates or removes analyzer from hold con-
dition.
Displays - low current setpoint.
Set Function (w/SELECT) - Sets low
current point.
Displays - full scale output setpoint.
Set Function (w/SELECT) - Sets full
scale output point.
Displays - temperature slope in percent.
Set Function (w/SELECT) - manually sets tem-
perature slope.
Select sub menu (mnemonic display).
ç
Shift to next digit (numeric display).
SELECT
Scroll through menu (mnemonic display).
é
Scroll digits (numeric display).
Scroll decimal position, µS/mS display.
Holding key down auto scrolls the main set
menu and each digit in the numeric display.
Press twice to access set-up menu.
ACCESS
Enter displayed value into memory.
Enter displayed menu item (flashing) into memory.
ENTER
SECTION 3.0
DESCRIPTION OF CONTROLS