USB board
Table 6-9
USB board description and part number
Description
USB board
USB board cable
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the optical drive (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
Remove the USB board:
1.
Disconnect the cable from the ZIF connector on the USB board (1).
2.
Remove the two Phillips M2.0 × 3.0 screws (2), and then remove the board from the computer (3).
Reverse this procedure to replace the USB board.
42
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Optical drive (select products only) on page
Bottom cover on page
Battery on page
31).
25).
26).
29).
Spare part number
L22538-001
L22522-001