Optane Memory Module (Select Products Only) - HP 470 G7 Maintenance And Service Manual

Optane memory module (select products only)

IMPORTANT:
drive. You cannot simultaneously install both an Optane memory module and a solid-state drive in the
computer.
Before removing the Optane memory module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the Optane memory module:
Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2).
▲
Reverse this procedure to install the Optane memory module.
The M.2 connector that supports the Optane memory module can also support a solid-state
Optical drive (select products only) on page
Bottom cover on page
Battery on page
(Preparation for disassembly on page
29).
31).
25).
26).
Component replacement procedures 37