2 Product Overview
2
Product Overview
About This Product
The Powerlink Option (Model: SI-EL3/V) is an option card designed to connect the
YASKAWA AC drive to an Powerlink network. Using this option card and an Powerlink
master can:
• operate the drive
• monitor the drive operation status
• read or modify drive parameters.
The SI-EL3/V option provides instant connectivity to an Powerlink network for the
YASKAWA V1000 drive. The option contains support for the Velocity mode according the
CANopen Device Profile and Motion Control (DSP402) profile. It also contains YASKAWA
vendor specific CANopen objects based on the present CANopen option board specification.
The Powerlink Option supports the following communication profiles;
• DS 301 Ver. 4.02
• DSP 402 Ver. 3.0 Velocity Mode
Applicable Models
The option can be used with the drive models in
Drive Series
V1000
<1> See "PRG" on the drive nameplate for the software version number.
EN 8
Table E.1 Applicable Models
Drive Model Number
CIMR-V2
CIMR-V4
CIMR-VB
YASKAWA Europe YEU TOEP C710606 87A - V1000 Option Powerlink - Installation Manual
Table
E.1.
Software Version
VSV901022 to VSV901099
<1>