SECTION 55 - - ELECTRICAL SYSTEM - - CHAPTER 4
1
2
26650
1.
Pulley retaining nut
2.
Pulley
3.
Cooling fan
4.
Front support plate
5.
Rotor
Firmly fix the alternator horizontally to an appropri-
ate holder with internal surfaces protected with soft
material.
Remove the guard (1) after unscrewing the nuts
which fasten it to the alternator (Fig. 13)
Before dismantling the alternator completely, carry
out the operations and tests described on the
following pages.
3
4
5
Alternator components
6.
Stator
7.
Rear support plate
8.
Rectifier bridge
9.
Protection guard
6
7
8
10.
Electronic voltage regulator with
built--in brushes
26651
11
10
9
12
13
603.54.471.00 - - 11 - - 2004