Hydrostatic Steering Control Valve Removal And Refitting - New Holland TD60D Repair Manual

HYDROSTATIC STEERING CONTROL VALVE
Removal−Refitting (Op. 41 204 30)
WARNING
Handle all parts with great care. Do not put your
hands or fingers between one part and another.
Wear the recommended safety clothing such as
goggles, gloves and safety boots.
To remove the hydrostatic steering control valve,
proceed as follows:
1. Disconnect the negative cable (1) from the
battery.
2. Drain the oil from the steering system.
3. To access the engine the hood must be opened.
4. Disconnect the oil pipes from the hydrostatic
steering control valve unit (1).
5. Remove the steering wheel (1) retaining nut and
remove the steering wheel and hand throtltle
lever.
SECTION 41 − STEERING − CHAPTER 1
1
25621
TRE0033A
TRE0434A
25758
603.54.471.00 − 11 − 2004
11
6
7
8
9