Adjusting The Valeo Clutch - New Holland TD60D Repair Manual

ADJUSTING THE VALEO CLUTCH

To adjust the clutch correctly it is necessary for the
release levers to be coplanar and set at the distances
(D and D , page 4) in relation to the bearing surface
1
on the engine flywheel.
NOTE: For the 12"/12" clutches the distance D
duced by 9 mm (0.3543 in.) (137 − 9 = 128 mm
(5.3937 − 0.3543 =5.0394 in.), see page 15.), lower-
ing distance of the point of contact with the thrust
bearing of the PTO release levers so as to use the
gauge 293731 where the difference between the re-
lease levers is 25 mm (0.9842 in.).
The adjustment can be made indistinctly with the
clutch on the bench or fitted on the engine flywheel.
1. Adjustment with clutch on bench.
Set the clutch on the plate of the universal outfit
293650 and lock it using the parts as described
above for disassembly.
Fit the gauge (C) and lock it with the handwheel (L)
for the universal outfit 293650.
Screw in or unscrew the adjuster screws (2) of the re-
lease levers for the main clutch (1) to obtain the clear-
ance (V ) between the ends of the gauge pins (C)
1
and the main clutch release levers. Then lock the
screws with the nuts (3).
C. Gauge.
L. Handwheel 293739.
V = 0.1 mm (0.0039 in.) Clearance to obtain between
1
the ends of the gauge pins (C) and release levers (1)
for 11"/11" clutch (mod. TD60D, TD70D, TD80D,
TD90D) or:
= 0.1 mm (0.0039 in.) for 12"/12" clutch (mod. TD95D).
1. Release levers.
2. Hex wrench.
3. Adjuster screw and locknut.
Screw in or unscrew the nuts (2) for the adjuster tie
rods of the release levers for the PTO clutch (1) to ob-
tain the clearance (V ) between the end of each re-
2
lease lever and the face of the gauge (C).
C. Gauge.
L. Handwheel 293739.
V = 0.1 mm (0.0039 in.) Clearance to obtain between
2
the gauge face (C) and release levers (1) for 11"/11"
mod. TD60D, TD70D, TD80D, TD90D
clutch (
0.1 mm (0.0039 in.) for 12"/12" clutch (
1. Release levers.
2. Adjuster nut.
SECTION 18 − CLUTCH − CHAPTER 1
is re-
1
) or:
mod. TD95D).
19
37
38
603.54.471.00 − 11 − 2004