Features Of Oxymat 7 - Siemens SIPROCESS GA700 Operating Instructions Manual

3.5

Features of OXYMAT 7

● Depending on the reference gas, the physical zero point can be set between 0% and 100%
oxygen
● Measuring range identification
● Electrically isolated analog output 0 / 4 to 20 mA (also inverted)
● Storage of measured values possible during calibration. The measured value is held at the
analog output at the value present when calibration was commenced.
● Short response time
● Low long-term drift
● Internal pressure sensor for correction of pressure variations in sample gas in the range
from 500 to 2 500 hPa (absolute)
● Monitoring of sample gas and reference gas (option)
● Smallest measuring spans (up to 0.5% O
● Vibration compensation as option
● Suitable for use with corrosive sample gases
● Hardware adapted to application
Field device
Operating Instructions, 05/2015, A5E35640463-02
3.5 Features of OXYMAT 7
) possible
2
Description
31