Field Module With Oxymat 7 Analyzer Module - Siemens SIPROCESS GA700 Operating Instructions Manual

3.2

Field module with OXYMAT 7 analyzer module

Overview
The OXYMAT 7 analyzer module is built into the enclosure of the FM. The field module is
delivered from the factory with a prefabricated connection cable. You must connect the cable
to the FCU before commissioning the device. You can find information about in the section
"Wiring (Page 47)".
Figure 3-2
Connection options
①
②
③
④
⑤
⑥
⑦
Figure 3-3
Field device
Operating Instructions, 05/2015, A5E35640463-02
Schematic representation of the field module
Sample gas inlet
Sample gas outlet
Blanking plug or purging gas connection
Reference gas inlet
Breathing device (pressure compensation coupling)
Cable gland
Ground connection
Connections on the field module
3.2 Field module with OXYMAT 7 analyzer module
Description
25