Track Editing (On Cd Changer Only) - Philips CDR785/01C User Manual

SPECIAL FEATURES

Track editing (on CD changer only)

CD TEX T EDIT ING
CDR
W
AUX
You can create a "track" by marking a passage of music
within one track on the current disc. This new "track" can be
used for recording or playing. The minimum track length is 4
seconds.
1 Press TRACK EDIT on the set.
starts blinking, TRACK and the current track
TRACK EDIT
number ? are displayed. The current track number is also
blinking in the track bar.
STEP
1 2 3 4 5
CD RW
2 Rotate ¡ JOG CONTROL ™ until the desired track number
is displayed.
3 Press YES to confirm the selected track.
The marker position A and the track time will be
displayed. The first 4 seconds of the track will be played
continously.
STEP
1 2 3 4 5 6
CD RW
4 Press PLAY/PAUSE 2 ; on the set to play to the desired
start position of your new "track" (the initial position of
marker A is always the start of the chosen track).
• To fast forward to the desired start position press 5 or 6
on the set.
• To fine tune the position press first PLAY/PAUSE 2 ; on the
set, then rotate ¡ JOG CONTROL ™.
34
RECOR D
REC LEVEL BALA NCE
TEXT
PROG
TRAC K EDIT
CD CD
JOG CONT ROL
COMP ILE CD
REC TYPE
NO
ERASE
FINALIZ E
TEXT TOTAL TRACK TIME TOTAL REM REC TRACK TIME
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROGRAM
CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
RECORD IN PROGRESS FINALIZE ALC
REC TRACK TIME
TEXT TOTAL TRACK TIME TOTAL REM
7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
DIGITAL
CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
FINALIZE ALC
RECORD IN PROGRESS
5 Press YES to confirm the position of marker A.
The marker position B and the new "track" time will be
displayed. The first 4 seconds before marker position B
until marker position B will be played continously.
STEP
YES
1 2 3 4 5
CD
6 Press PLAY/PAUSE 2 ; on the set to play to the stop
position of your new "track" (The initial position of marker B
is always the position of marker A plus 4 seconds).
7 Press YES to confirm the marked passage.
is shown, A-B and the track edit time are
TRACK EDIT
displayed.
STEP
1 2 3 4 5
12
DIGITAL
12
CD RW
ANALOG
• Press TRACK EDIT again to leave Track Edit mode.
The new "track" will be stored.
Note: If you open the CD changer tray the edit is deleted.
Clearing the track edit
1 Press NO during stop.
CLEAR A-B ? is displayed.
2 Press YES to clear the markers.
The markers A-B are cleared.
12
12
REC TRACK TIME
TEXT TOTAL TRACK TIME TOTAL REM
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
RW CD RW
SHUFFLE REPEAT ALL EDIT
FINALIZE ALC
RECORD IN PROGRESS
REC TRACK TIME
TEXT TOTAL TRACK TIME TOTAL REM
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
CD RW
SHUFFLE REPEAT ALL EDIT
RECORD IN PROGRESS FINALIZE ALC
12
DIGITAL
12
OPTICAL
ANALOG
12
DIGITAL
12
OPTICAL
ANALOG