High Speed Recording And Automatic Finalizing - Philips CDR785/01C User Manual

INTERNAL RECORDING

High speed recording and automatic finalizing

High speed recording and automatic finalizing of the
current disc
CD TEX T EDIT ING
CDR
W
AUX
Notes:
– During High Speed recording, the Pause function is not
operative.
– Copy prohibited tracks will be copied analog. ANALOG REC
is displayed.
– During High Speed recording, the sound is not audible.
– When the CDR(W) already contains a recording the ALC
function will become active.
– If required the recording level can be set first, using the REC
LEVEL key. See "Rec Level key" under "Recording General".
1 Make sure that the CDR(W) is absolutely free of scratches and
dust particles.
2 Press CD™CD to enter into the record mode.
Both decks will be selected in the display, the arrow and the
YES key start blinking. The remaining recording time of the
CDR(W), the total playing time of the source CD and
RECORD CD1 (or 2, 3) ? are displayed.
STEP TEXT
1 2 3 4 5 6 7
CD RW
3 Press YES to start recording and finalizing.
The arrow lights,
shown, high speed recording and finalizing start and the
actual recording time left starts to count down.
• To check the elapsed recording time, press DISPLAY. This can be
done during recording.
• Recording will stop automatically.
4 To stop recording manually, press STOP 9.
• If STOP was pressed within 3 seconds after YES, no recording
will take place.
Note: If a program was already available before pressing
CD ™ CD, this will be ignored.
current disc will be recorded. After finishing the recording,
is shown and the program is available again.
PROG
High speed recording and automatic finalizing (optional) of
the current program
1 Make sure that the CDR(W) is absolutely free of scratches and
dust particles.
2 Select and store all desired tracks in the CD changer memory
(see "Programming track numbers").
24
RECOR D
REC LEVEL BALA NCE
TEXT
PROG
TRAC K EDIT
CD CD
JOG CONT ROL
COMP ILE CD
REC TYPE
NO
YES
ERASE
FINALIZ E
then lights up on the display.
ALC
TOTAL TRACK TIME TOTAL REM REC TRACK TIME
8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
DIGITAL
CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
FINALIZE ALC
RECORD IN PROGRESS
and
RECORDING IN PROGRESS FINALIZE
goes off and the
PROG
2 Press COMPILE CD to enter into the record mode.
Both decks will be selected in the display, the arrow starts
blinking. The remaining recording time of the CDR(W),
the total playing time of the program and
RECORD PROG ? are displayed.
STEP TEXT
1 2 3 4 5 6 7
CD RW
• If the total time of the program is of bigger size than the
remaining recording time of the CDR(W):
NOT FITTING ! will be displayed briefly, followed by the
remaining recording time and RECORD PROG ?
If you still start recording, only the tracks of the program that fit
onto the CDR(W) will be recorded.
3 Press either:
NO to change the program.
starts blinking. Now you can change the program (see
PROG
"Program") and return to the record mode by pressing
COMPILE CD.
or
YES to confirm recording.
AUTO FIN ? is displayed.
4 Press either:
YES, if the CDR(W) shall be finalized after recording,
or
NO, if the CDR(W) shall not be finalized after recording.
The recording process starts. The arrow lights,
is shown, high speed recording and
PROGRESS
selected) start and the actual recording time left starts to
count down.
• To check the elapsed recording time, press DISPLAY. This can be
are
done during recording.
• Recording will stop automatically.
5 To stop recording manually, press STOP 9.
• If STOP was pressed within 3 seconds after YES, no recording
will take place.
Note:
If no program is available and you press COMPILE CD, you enter
immediately into the program menu. Start your programming and
return to the record mode by pressing PROGRAM or COMPILE CD.
Important:
If you want to play the recorded CDR disc on any regular
CD player, it must first be finalised. See 'Finalising discs'.
Finalised CDRW discs play only on CDRW compatible CD
players.
TOTAL TRACK TIME TOTAL REM REC TRACK TIME
8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
DIGITAL
CD RW
OPTICAL
SHUFFLE REPEAT ALL EDIT
ANALOG
RECORD IN PROGRESS FINALIZE ALC
RECORDING IN
FINALIZE
(if