Digital Coaxial Connections; Digital Optical Connections - Philips CDR785/01C User Manual

Digital coaxial connections

This connection is required if you want to make recordings
from an external CD player with a digital coaxial output.
RECEIVER/AMPLIFIER
IN
OUT
TA PE /CD R
L
R
IN
OUT
IN OUT
AN AL OG
DIG ITA L
3
CD RECORDER
OP TI CA L
IN
OUT
DIG ITA L
CD PLAYER
1 For external recording, connect the cord 3 between the
DIGITAL IN-jack on the set and the DIGITAL OUT-jack of an
external CD player.
Note: Your set is equipped with a digital coaxial output
(common output for CD recorder & CD changer deck).
This output can be used for digital playback. (e.g.
Philips receiver FR960 or FR970.)
1
2
OP TI CA L
IN
OU T

Digital optical connections

This connection is required if you want to make recordings
from an external CD player with a digital optical output.
RECEIVER/AMPLIFIER
IN
OUT
TA PE /CD R
L
R
IN
OUT
IN OUT
AN AL OG DIG ITA L
CD RECORDER
IN
OUT
DIG ITA L
CD PLAYER
When connecting the Digital
Optical cord, make sure it
is fully inserted until
there is a click.
1 Remove the dust caps from the digital optical connection.
(We recommend you save the cap.)
2 For external recording, connect a fibre-optic cord 4
between the digital optical input of the set and the digital-
optical output of an external CD player.
Note: For playback, the digital coaxial outputs or analog
outputs of the CD Changer and CD recorder should be
connected to an amplifier.
INSTALLATION
1
2
OP TI CA L
IN
4
OP TI CA L
OU T
15