Repeat Cd, Track Or Program; Programming; Remarks About Programming - Philips CDR950BK99 Instructions For Use Manual

PLAYING

Repeat CD, track or program

1 Press REPEAT one or more times during CD play.
When lights up, the current track will play
REPEAT TRACK
repeatedly. When
REPEAT ALL
program plays repeatedly.
REM REC TIME TRACK TOTAL
1 2 3 4 5 6 7 8
DIGITAL I I
PROGRAM
OPTICAL I
CD RW
ANALOG
2 To return to normal play, press REPEAT one or more times
until:
The text disappears from the display.
REPEAT
Note:
- You can use shuffle in combination with
programmed play.
- is also cleared when you open the disc tray.
REPEAT

Remarks about programming

• You can program up to 99 tracks to play in any desired
sequence.
• Tracks can be programmed more than once, but each time
counts as a track ( ).
STEP

Programming

1 In Stop mode press PROGRAM to enter Program mode.
flashes and PROGRAM will appear on the
PROGRAM
display.
REM REC TIME TRACK TOTAL
1 2 3 4 5 6 7 8 9 10 11
DIGITAL I I
PROGRAM
OPTICAL I
CD RW
ANALOG
2 Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
REM REC TIME TRACK TOTAL
2 7 8 11
DIGITAL I I
PROGRAM
OPTICAL I
CD RW
ANALOG
24
lights up, the entire disc or
REM TRACK TIME FADE STEP
MANUAL SYNC SCAN
SHUFFLE REPEAT TRACK ALL
or
REPEAT ALL
REM TRACK TIME FADE STEP
MANUAL SYNC SCAN
SHUFFLE REPEAT TRACK ALL
REM TRACK TIME FADE STEP
MANUAL SYNC SCAN
SHUFFLE REPEAT TRACK ALL
or:
Enter a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
The track will be stored in the program.
The track number, total program time and the number of
programmed tracks (
STEPS
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROGRAM to end programming.
lights continuously.
PROGRAM
5 Press PLAY/PAUSE 2 ; to start programmed play.
Note:
- To review the program, press PROGRAM, followed by 5 or
6 with the CD recorder in Stop mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, PROG FULL will
appear on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
will disappear from the display.
PROGRAM
• The program is also cleared when you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROGRAM to enter Program mode.
2 Use 5 or 6 to select the track from to be deleted.
The track number and program step will be shown on
the display.
3 Press CANCEL to erase the track from the program.
The remaining program steps and the remaining playing
time on the program will be displayed.
PROGRAMMING
) are displayed.