Manual Recording - Philips CDR785/01C User Manual

Manual recording

Manual recording from an external source
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Press repeatedly AUX to select the input for the external
source you want to record from.
AUX DIGITAL is displayed if the digital coaxial
input is selected.
AUX OPTICAL is displayed if the digital optical input
is selected.
AUX ANALOG is displayed if the analogue input is
selected.
3 Press REC TYPE on the set to enter into the recording menu.
4 Rotate ¡ JOG CONTROL ™ to select the record type.
AUX MANUAL ?: for manual start of recording
5 Press YES to confirm your selection.
WAIT is displayed.
RECORD ? , AUX and the remaining recording time of
the CDR(W) are displayed.
6 Start playback on the external source in order to set the
optimal recording level on the CD recorder (see "REC LEVEL
key").
Note: If CHECK INPUT is flashing, check the digital
connection.
7 Stop playback on the external source.
8 Go to the beginning of the desired track.
9 Press YES on the set and simultaneously start playback on
the external source.
The CD recorder starts to record and recording in
progress is shown. The remaining recording time left of
the CDR(W) is displayed.
STEP
TEXT TOTAL TRACK TIME TOTAL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
CD RW
SHUFFLE REPEAT ALL EDIT
10 Press STOP 9 on the set to stop recording.
UPDATE is displayed and
RECORDING IN PROGRESS
off.
Manual microphone recording
R
W
1 Make sure that the CDR(W) is absolutely free of scratches
2 Set MIC LEVEL to the minimum level to prevent acoustic
3 Connect a microphone to MIC.
4 Press repeatedly AUX to select the input for the external
5 Press REC TYPE on the set to enter into the recording menu.
6 Rotate ¡ JOG CONTROL ™ to select the record type:
7 Press YES to confirm your selection.
8 Set the optimal recording level on the CD recorder (see
• In addition you can also set the optimal recoding level of
9 If AUX MIX MIC is selected:
REC TRACK TIME
REM
DIGITAL
CD RW
OPTICAL
ANALOG
FINALIZE ALC
RECORD IN PROGRESS
goes
10 Press STOP 9 on the set to stop recording.
EXTERNAL RECORDING
ITING
RECOR D
CD CD
CDR
COMP ILE CD
REC TYPE
AUX
ERASE
FINALIZ E
and dust particles.
feedback (e.g. a loud howling sound) before you connect the
microphone.
source you wish to mix the microphone with.
AUX MIX MIC: the microphone is mixed to the
external source.
MIC ONLY: only the microphone is recorded.
WAIT is displayed.
RECORD ?, AUX and the remaining recording time of
the CDR(W) are displayed.
"REC LEVEL key").
the microphone by turning MIC LEVEL.
Press YES on the set and simultaneously start playback on
the external source.
The CD recorder starts to record and recording in
progress is shown. The remaining recording time left of
the CDR(W) is displayed.
STEP
TEXT TOTAL TRACK TIME
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
CD RW
SHUFFLE REPEAT ALL EDIT
If MIC ONLY is selected:
Press YES on the set to start recording.
The CD recorder starts to record and
is shown. The remaining recording time left of
PROGRESS
the CDR(W) is displayed.
UPDATE is displayed and
RECORDING IN PROGRESS
off.
REC LEVEL
BALA NCE TEXT
PROG
TRAC K EDIT
JOG CONT ROL
NO
YES
REC TRACK TIME
TOTAL REM
DIGITAL
CD RW
OPTICAL
ANALOG
RECORD IN PROGRESS FINALIZE ALC
RECORDING IN
goes
29