Table of Contents
Advertisement
DOK-SYTROX-MPES2******-IT01-EN-P
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
8.2.3
Connect the Motor Fan
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Cooling of forced-ventilated motors (design IC416) is done via an electrical
fan which is mounted and separately connected onto the motor. It is operated
with 230 V (star connection) or 400 V (delta connection). The fan is factory-
adjusted designed for 400V.
The electrical connection is done by means of fan terminal box on the fan
housing (see
fig. 8-1 "Connection Overview" on page
connection scheme is figured within the lid of the fan terminal box and shows
the connection for 230V and 400V. The interconnection is factory-adjusted
designed for 400V.
Fig. 8-8:
Connection scheme motor fan
The following table contains electrical power data of the motor fan with differ‐
ent frame sizes.
Bosch Rexroth AG
71/143
Connection
66). Additionally, the
Advertisement
Table of Contents
Troubleshooting
