Assembly Alignment Pghx On Mot-Fc; Permitted Installation Positions Of The Motor-Pump Unit - Bosch Rexroth Sytronix FcP 50 Series Operating Instructions Manual

DOK-SYTROX-MPES2******-IT01-EN-P
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
7.5.5

Assembly Alignment PGHx on MOT-FC

7.6

Permitted Installation Positions of the Motor-Pump Unit

LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Fig. 7-17: Suction port
Bottom
PGH2 ✔
PGH3 ✔
PGH4 ✔
PGH5 ✔
Tab. 7-11: Allowed assembly variants (suction port)
Fig. 7-18: Permitted fastening of the motor-pump unit
The assembly of the motor-pump unit can be done in the following design:
● A (foot fastening horizontally)
● B (flange fastening horizontal, foot on flange)
● V (flange fastening vertically, without foot)
NOTICE
In the case of vertical installation, mount the motor-pump unit in such a way,
that the motor is above of the pump.
Bosch Rexroth AG
Top Left
✔ ✖
✔ ✖
✔ ✔
✔ ✔
Motor damage due to escaping oil, if the mo‐
tor is located under the pump!
63/143
Mounting
Right
✖
✖
✔
✔