Table of Contents
Advertisement
DOK-SYTROX-MPES2******-IT01-EN-P
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
2
Safety notes
2.1
About this chapter
2.2
Appropriate use
2.3
Inappropriate use
2.4
Qualification of the personnel
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
This product was manufactured according to the generally accepted rules of
technology. There is, however, still a risk of personal injury or material dam‐
age.
Please observe the general safety instructions in this chapter and the safety-
related guidelines and handling instructions in this manual. This will prevent
personal hazards, material damage and errors.
●
Read this documentation completely and thoroughly before working with
this product.
●
Keep this documentation where it is accessible to all users at all times.
●
Transfer the product to third parties only together with the necessary
documentation.
This product is an electro-hydrostatic drive system.
The Sytronix system is designed to be connected to a machine as a part of
the system. Sytronix system should be only used in the machine specifically
design for the Sytronix system.
The Sytronix system may be operated as follows:
●
For pressure-controlled hydraulic supply (for SvP: with detaching vol‐
ume flow control).
●
The Sytronix system is not suited to execute safety-relevant functions.
Within the Sytronix system, a plausibility check of the command
and actual value (pressure and speed) is not provided.
●
Ensure that the plausibility check is done within the machine
control.
An application specific adjustment of the parameters during initial start-up is
not permitted.
The product is only defined for industrial use and not for private use.
Appropriate use involves that you have completey read and understood this
documentation, especially this chapter.
Improper use of these devices, failure to follow the safety instructions in this
document or tampering with the product, including disabling of safety devi‐
ces, may result in material damage, bodily harm, electric shock or even
death!
Bosch Rexroth AG is not liable for damages resulting from non appropriate
use. The risks of non appropriate use is in the sole responsibility of the user.
The procedures and operatins described in this document are based on the
user has the basic knowledge of corresponding terms of the machine, hy‐
draulic and electric system. For transport and handling of the product, addi‐
Bosch Rexroth AG
19/143
Safety notes
Advertisement
Table of Contents
Troubleshooting
