Putting The Xs Wireless Syst Ems Into Operation; Putting The Receiver Into Operation - Sennheiser XS Wireless Series Instruction Manual

Putting the XS WIRELESS systems int o operation
Put t ing t he XS WIRELESS syst ems int o operat ion
Put t ing t he receiver int o operat ion
You can set up the receiver as a single device or mount it into a 19" rack. For information
on rack mounting and optional accessories (e.g. rack mount " ears" and remote antennas),
visit t he XSWIRELESS product page at www.sennheiser.com.
Set t ing up t he receiver
C AUTION
Risk of staining furnit ure surfaces!
Furniture surfaces are often treated with varnish, polish or synthetics which might cause
stains when they come into contact with other synt hetics such as the device feet.
Do not place the receiver on delicate surfaces; if necessary, place a pad under the
E
receiver.
Place t he receiver on a flat , even surface.
E
C onnect ing t he receiver t o t he mains
C onnect the connector of the mains unit to the DC socket
E
C onnect the mains unit to a wall socket. The receiver switches on, the display panel is
E
backlit.
C onnecting and aligning the rod antennas
The supplied rod antennas are suit able for all applications where – good recept ion condi-
tions provided – a wireless transmission system is t o be used without a large amount of
installation work. To increase the range, you can use remot e antennas which are available
as accessories from your specialist dealer.
C onnect the t wo rod antennas to the BNC socket s
E
Align the antennas in a V-shape.
E
C onnect ing t he amplifier/ mixing console
Use a suitable cable to connect the amplifier or mixing console to the XLR-3M socket
E
or the ¼" (6.3 mm) jack socket
For a rough adjust ment of the
E
responding position.
Use the volume control 7
E
input of the amplifier or mixing console.
E and
0
.
AF audio level, set the LINE/
of the receiver to optimally adjust the
C on t he receiver.
8 at the rear of the receiver.
9
A
MIC slide switch to the cor-
AF audio level to the
XS WIRELESS | 7