Connecting Circuit Breakers; Figure 6-5 Grounding Lug; Figure 6-6 Grounding Lug - Siemens SINAMICS SL150 6SL39616RC100AA02 Operating Instructions & Installation Instructions

Figure 6-5
Figure 6-6
6.10.2

Connecting circuit breakers

To connect the circuit breaker, proceed as follows:
1. Disconnect the cabinet from the power supply.
2. Route the control cables into the cabinet from below.
3. Connect the shields of the control cables to the serrated bar. For additional information, see
4. Connect the control cables as specified in the circuit manual.
SINAMICS SL150 6SL39616RC100AA02
Operating Instructions Rev.201910281458 EXAMPLE
Grounding lug
Grounding lug
Chapter "Using the equipotential bonding strip and shield bus (Page 64)".
Electrical connection
6.10 Connecting the closed-loop control
67