HP 53150A Series Programming Manual page 33

Chapter 2 Command Summary
HP 53150A/151A/152A Command Summary
Table 2-2. HP 53150A/151A/152A SCPI Command Summary
Keyword/Syntax Parameter Form
:ABORt
:CONFigure
:DISPlay
:ENABle <Boolean>
[:WINDow]
:BACKground
[:STATe] <Boolean>
:FETCh
:INITiate
:CONTinuous <Boolean>
[:IMMediate]
:INPut
:FILTer
[:LPASs]
[:STATe] <Boolean>
:MEASure
Programming Guide
Std/New Comments
Std Event; no query. Resets the trigger system
and aborts any measurement in progress.
Places the trigger system in the IDLE state.
Std See Measurement Instructions in this table.
Std Subsystem. Controls the selection and
presentation of textual information on the
display.
Std Controls whether or not the entire display is
visible.
New Turns the LCD display backlight ON or
OFF.
Std See Measurement Instructions in this table.
Std Subsystem. Controls the initiation of
measurements.
Std Sets the instrument for continuously
initiated or user-initiated measurements.
Std Event; no query. Causes the instrument to
initiate and complete one full measurement
cycle.
Std Subsystem. Controls the characteristics of
the instrument's Channel 1 input port.
Std Subtree. Controls a filter that can be
inserted in the path of the measurement
signal.
Std Subtree. Selects the Low-PASs filter.
Std Enables or disables the Channel 1
low-pass filter (approx. 50 KHz).
Std See Measurement Instructions in this table.
2-13