HP 53150A Series Programming Manual page 146

Chapter 4 Command Reference
Common Commands
*DDT <arbitrary block>
(Define Device Trigger Command)
*DDT?
(Define Device Trigger Query)
*DDT
COMMAND
*DDT?
Sets or queries the action that the device executes when it receives the
IEEE 488.1 Group Execute Trigger (GET) interface message (page 4-7) or
a *TRG common command.
•
QUERY RESPONSE
•
•
COMMENTS
•
None
RELATED
FRONT-PANEL
KEYS
4-46
Definite length block
The query response is one of the following terminated with a new line
and EOI:
#14INIT
#216INIT:*WAI;:DATA?
#0
#15FETC?
#15READ?
*RST: #18INIT:1MM
If a zero-length <arbitrary block> is specified as the parameter, the
Counter does nothing when it receives a GET or *TRG command.
Programming Guide