HP 53150A Series Programming Manual page 172

Chapter 5 Errors
Error Types
Table 5-2. Errors (Continued)
Number Error String
-211 Trigger ignored
-213 Init ignored
-220 Parameter error
-221 Settings conflict
-222 Data out of range
-223 Too much data
-224 Illegal parameter value
-230 Data corrupt or stale
-240 Hardware error
-241 Hardware missing
-300 Device-specific error
-310 System error
-321 Out of memory
-330 Self-test failed
Queue overflow
Query error
Query INTERRUPTED
-350 Queue Overflow
-400 Query error
-410 Query INTERRUPTED
5-10
Cause
Indicates that a GET or *TRG was received and recognized by the
Counter but was ignored.
Indicates that a request for a measurement initiation was ignored as
another measurement was in progress.
Indicates that a program data element related error occurred. This error
is used when the Counter cannot detect more specific errors.
Indicates that a legal program data element was parsed but could not be
executed due to the current Counter state.
Indicates that a legal program data element was parsed but could not be
executed because the interpreted value is outside the legal range
defined by the Counter. Typically, the value is clipped to legal limit.
Indicates that a legal program data element of block, expression, or
string type was received that contained more data than the Counter
could handle due to memory or related Counter-specific requirements.
Used where exact value, from a list of possible values, was expected.
No valid data available. New measurement started but not completed.
Indicates that a legal program command or query could not be executed
because of a hardware problem in the Counter.
Indicates that a legal program command or query could not be executed
because of missing Counter hardware.
This is the generic device-dependent error.
Indicates that a system error occurred.
Indicates that the Counter has detected that insufficient memory is
available.
Indicates at least one failure occurred when *TST? was executed.
Indicates that there is no room in the error queue and an error occurred
but was not recorded.
This is the generic query error.
Indicates that a condition causing an INTERRUPTED Query error
occurred. For example, a query followed by DAB or GET before a
response was completely sent.
Indicates that there is no room in the error queue, and that an error
occurred but was not recorded.
This is the generic query error.
Indicates that a condition causing an INTERRUPTED Query error
occurred. For example, a query followed by a DAB or GET before a
response was completely sent.
Programming Guide