Omron SYSMAC CS Series Programming Manual page 199

Manipulating Files
Programming Console
Item 1 Item 2
0: Send 0: PC to Memory Card
1: Memory Card to PC
1: Verify
2: Initialize
3: Delete
A Memory Card can be installed in a computer's PC Card slot with the HMC-
AP001 Memory Card Adapter (sold separately). Installing a Memory Card in
the computer allows data files (.IOM, .TXT, or .CSV), program files (.OBJ),
and parameter files (.STD) to be treated as standard MS-DOS files in a Win-
dows environment. Data can be read from and written to the Memory Card
like any other computer storage device or disk.
HMC-AP001 Memory Card Adapter
Memory Card
FUN
The following operations can be performed.
Item 3
Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD.
Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD.
Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD.
Enter 9713 (Memory Card)
or 8426 (EM file memory).
Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD.
Note The file types are shown in the following table.
Symbol
OBJ Program file (.OBJ)
Computer's PC Card slot
000000 CT00
CLR
0: Transfer
CONT
SHIFT
1: Verify
#
0: Initialize
↓
1: Delete
Item 4
Set transfer start and
end addresses.
Set transfer start and
end addresses.
Set comparison start and
end addresses.
---
Media type, file name
Section 5-2
Item 5
Media type, file name
Media type, file name
Media type, file name
---
---
File type
179