Table of Contents
Advertisement
10 Hookups With a Stereo TV
VIDEO (yellow) and
AUDIO (red and white) OUT Jacks
Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack
on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on
the back of the VCR. Then, connect the other end of the
video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the red and white AUDIO
OUT Jacks on the back of the VCR. Then, connect the
other end of the audio cable to the AUDIO IN Jacks on
your TV.
4
Turn on your TV, making sure it is in Line Input mode. This
might be referred to as the TV's Audio/Video In channel or the
Auxiliary In channel. Please refer to your TV owner's manual for
details.
1
AUDIO
ANT
IN
L
OUT
IN
R
VIDEO
OUT
CH3 CH4
OUT
IN
2
Video Cable
3
Audio Cable
antenna or
cable to
ANT(enna)
IN Jack
Audio and Video
IN Jacks on TV
Helpful Hint
• A stereo audio cable (not supplied)
is used here to deliver audio to the
TV's left and right channels.
Advertisement
Table of Contents
