Playing - Philips VR674CAT Owner's Manual

30 Playing

Read and follow these steps to play a tape.
1
Turn on the TV and set it to channel 3 or 4
which the CH3/CH4 switch on the back of the VCR is set.
2
Insert a tape in the VCR. The PWR., VCR, and Cassette-Inside
lights will appear on the display panel. If the tape's record tab is
missing, playback will start automatically.
3
If playback does not start automatically, press the VCR
button, then press the PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REW(ind)/{ button to rewind the tape.
6
Press the EJECT button to remove the tape.
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape you
recorded in S-VHS format. An S-VHS format tape will play the
same as a normal format tape. This unit automatically detects
whether the tape is in S-VHS format or in normal format.
When you play an S-VHS format tape on this unit, you can not get
the high resolution that would be available on an S-VHS VCR.
Noise lines (black and white streaks) may appear on the picture.
__ the channel to
6
5
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (The VCR light will
appear on the display panel. If it
does not, press the VCR/TV button
once.) Press the VCR button, then
press the PLAY/o button.
• Other playback options and fea-
tures are on pages 44-57.
• If REPEAT PLAY is ON, playback
will begin automatically when you
insert a tape, even when the record
tab is intact. (However, playback
will not begin if the VCR power is
off and a timer recording is set.)
1
Turn on the TV.
2
Insert a tape in the VCR.
EJECT
POWER
STATUS SMART
MENU CLEAR
/EXIT PICTURE
1 2 3
4 5 6
7 8 9
MEMORY ALT.CH
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
CBL
VCR TV
/DBS
VCR/TV SPEED
VCR PLUS+
/ENTER
F.ADV X2 PLAY SLOW
TRACKING VAR.SLOW
TIME INDEX REC END SKIP
SEARCH
Helpful Hints
3
4