Multi-Channel Television Sound System 55 - Philips VR674CAT Owner's Manual

4hd/hifi/clock funct vcr w/vcr+

Hide thumbs Also See for VR674CAT:

Specification sheet (2 pages)

Hook-up instructions (10 pages)

Table Of Contents

Table of Contents

Your VCR can play Hi-Fi (high fidelity) stereo recordings, which have a crisp, clear sound from two

sources. Your VCR also can play second audio tapes. Usually, that means your program is in a second lan-

guage. Of course, your VCR will play tapes recorded in monaural (single-source) sound as well.

Your VCR also will record in Hi-Fi stereo or in second audio. When you play that tape on the VCR, it will

be in stereo or second audio.

Read the directions on this page to familiarize yourself with your VCR's stereo and second audio setups.

Then follow the directions on page 56 to record in stereo or second audio and the directions on page 57

to play Hi-Fi stereo tapes.

Understanding On-Screen Displays

When you receive a signal from a channel you're watching, portions of the on-screen display shown below

will appear when you press the STATUS/EXIT button on the remote control.

The indication 2ND AUD or

TV STEREO that appears on

this side of the status

display tells you if your VCR

is receiving a second audio

or stereo broadcast.

Although a program may be

broadcast in both stereo and

second audio, you cannot

record in both stereo and

second audio at the same

time. Follow the steps on

page 56 to program the

VCR to receive a second

audio or stereo broadcast.

To record and play programs broadcast in stereo, even if you have a Single-Speaker TV, just use one of the

connections shown, then follow the steps on pages 56-57.

Stereo Amplifier

or Receiver

For stereo sound, connect the

audio cables to the AUDIO OUT

Jacks on the VCR and to the

AUDIO IN Jacks on the Stereo

Amplifier or Receiver.

Then, connect the video cable to

the VIDEO OUT Jack of the VCR

and to the VIDEO IN Jack of a

monitor TV.