Table of Contents
Advertisement
10 Hookups with a Stereo TV
MVR650MG/17
VIDEO (yellow) and AUDIO
(red and white) OUT Jacks
MVR440MG/17, MVR450MG/17
VIDEO (yellow) and
AUDIO (white) OUT Jacks
Audio and Video cables are not supplied.
1
Connect the antenna or Cable TV signal to the
ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable to the VCR's yellow VIDEO
OUT Jack and to the TV's VIDEO IN Jack.
3
MVR650MG/17
Connect a stereo audio cable to the VCR's red and
white AUDIO OUT Jacks and to the TV's AUDIO IN
Jacks. Match cable colors to jack colors.
MVR440MG/17, MVR450MG/17
Connect a "Y" splitter audio cable to the VCR's
white AUDIO OUT Jack and to the TV's AUDIO IN
Jacks.
4
Turn on your TV, making sure it is in Line Input or
Auxiliary mode.Your TV may refer to this as an Audio/Video
In channel, or A/V In, External In, Auxiliary In, etc. Such chan-
nels are usually located near channel zero (0). Or, your TV
remote may have a button or switch that selects different
Video or Auxiliary channels. See your TV manual for details.
1
ANT
AUDIO
IN
L
OUT
IN
R
VIDEO
OUT
OUT
IN
2
Video Cable
3
Audio Cable
1
ANT
IN
AUDIO
OUT
IN
OUT
VIDEO
2
Video Cable
3
Audio Cable
Antenna or Cable TV signal
to ANT(enna) IN Jack
Antenna or Cable TV signal
to ANT(enna) IN Jack
Helpful Hint
• If your TV has only one AUDIO
IN jack, connect a single audio
cable to the white AUDIO OUT
jack on the VCR and to the white
AUDIO IN jack on the TV. See
your TV manual for details of
connecting a VCR to the TV.
Audio and Video
IN Jacks on TV
Audio and Video
IN Jacks on TV
Advertisement
Table of Contents
