Time Search - Philips VR674CAT Owner's Manual

50 Time Search

Follow these steps to program the VCR to search forward or
backward on a tape a specific length of time. There must be a tape
in the VCR.
1
Press the VCR button.
2
Press the TIME SEARCH button.
TIME SEARCH
0:00
ENTER SEARCH TIME
3
Within 10 seconds, use the Number buttons to enter the
desired length of time you want to skip forward or back-
ward. For example, for 1 hour, 25 minutes, press Number but-
tons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.
4
Within 10 seconds, press the F.FWD/B button or the
REW(ind)/{ button. The VCR will skip over the specified
length of time, then begin playback.
EJECT
POWER
STATUS SMART
MENU CLEAR
/EXIT PICTURE
1 2 3
3
4 5 6
7 8 9
MEMORY
ALT.CH
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
CH. VOL.
MUTE
1
CBL
VCR TV /DBS
VCR/TV SPEED
VCR PLUS+
/ENTER
F.ADV X2 PLAY SLOW
TRACKING VAR.SLOW
2
TIME INDEX REC END SKIP
SEARCH
Helpful Hints
• If you want to search for more than
59 minutes, you must enter the
length of time in hours and minutes.
For example, to search forward 70
minutes, press 1,1,0 at step 3.
• You can not do a Time Search
while recording.
• To remove the Time Search display,
press the TIME SEARCH button
again.
• To cancel a Time Search that is in
progress, press the STOP/p button.
• If the end of the tape is reached
during a Time Search, the VCR will
cancel the search and rewind the
tape. Details are on page 45.
4