Carrier ComfortVu TBPL-24-H Installation And Operation Manual page 22

System mode and fan speed
5. Press the [C/F–Prog] button again. The system MODES will flash.
6. Use the [+] and [-] buttons to select the system mode of the first event
7. Press the [C/F–Prog] button again. The FAN SPEEDS will flash.
8. Use the [+] and [-] buttons to select the fan speed of the first event.
Setpoint
1. Press the [C/F – Prog] button again. The setpoint will flash.
Note: If the thermostat is configured to have two setpoints,
first adjusts the setpoint for cooling and then the setpoint for heating.
2. Use the [+] and [-] buttons to adjust the setpoint of the first event.

Follow the steps above for the other schedule events of the same daily period (P2 for two events per day, or
P2, P3 and P4 for four events per day).

Follow the steps above for all daily periods.
ComfortVu™ BACnet Thermostat Model Standard TB-HM (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020
Installation and Operation Guide
18
All rights reserved