Safety Instructions; Symbols And Icons; General Safety Instructions For Power Tools - Parkside PBSA 20-Li A1 Translation Of The Original Instructions

GB IE NI
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures
to reduce vibration exposure are the
wearing of gloves when using the tool
and limiting the working hours. For this
purpose all parts of the operating cycle
have to be considered (for example,
times when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
Carefully read these operating in-
structions.
Electrical appliances must not be
disposed of with the domestic
waste.
This device is part of the Park-
side X 20 V TEAM series
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
6
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WARNING! READ ALL SAfETy
DIRECTIONS AND INSTRuC-
TIONS. Omissions in the compli-
ance with safety directions and inst-
ructions can cause electrical shock,
fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
CAREfuL HANDLING AND uSE Of
BATTERy DEVICES
•
Only recharge batteries using
chargers belonging to the Park-
side X 20 V TEAM series. Risk of
fire if a charger that is suitable for a spe-
cific type of battery is used with other
batteries.
• In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries may
result in injuries and risk of fire.
• Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could
cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or fire.