Mounting the Access Point
The DBA-1210P can be mounted on a wall or ceiling
for optimal coverage.
Mounting on a Solid Wall or Ceiling
1. (Optional) Attach the included lock plate to the
mounting plate using the included screws.
Figure 4: Attaching the Lock Plate
2. Use the mounting plate to mark the location
where to drill the holes in the wall or ceiling.
Figure 5: Mounting Panel Marking
3. Drill holes on the markings and place the
included anchors into the drilled holes.
Figure 6: Placing Anchors
4
4. Align and place the mounting plate on top of the
anchors and use the included screws to secure
the mounting plate to the surface.
Figure 7: Securing the Mounting Plate
5. Connect the Ethernet cable and power adapter
(optional) to the device.
6. Slide the DBA-1210P onto the mounting plate.
Figure 8: Placing The Access Point
Mounting on a Ceiling Crossbar
1. (Optional) Attach the included lock plate to the
mounting plate using the included screws.
Figure 9: Attaching the Lock Plate
2. Clip the two included ceiling brackets onto the
ceiling crossbar. Make sure both brackets are
positioned in line with each other.