Table of Contents
Advertisement
3. When prompted, enter the default login
credentials:
User name: admin
Password: admin
Attaching the Rubber Pads
The included rubber pads can be placed on the
bottom of the device to prevent the device from
damaging the surface it is placed on.
1. Remove the rubber pads from the adhesive strip.
2. Stick one pad on each foot on the bottom panel
of the access point.
Mounting the Access Point
The DBA-1510P can be mounted on a wall for
optimal coverage.
1. Use the mounting plate to mark the location
where to drill the holes in the wall or ceiling.
Figure 5: Mounting Panel Marking
2. Drill holes on the markings and place the
included anchors into the drilled holes.
Figure 6: Placing Anchors
2
3. Align and place the mounting plate on top of the
anchors and use the included screws to secure
the mounting plate to the surface.
Figure 7: Securing the Mounting Plate
4. Connect the Ethernet cable and power adapter
(optional) to the device.
5. Place the DBA-1510P diagonally on top of the
mounting ring brackets and rotate the device
clockwise until the brackets snap into place.
Figure 8: Placing The Access Point
Locking the DBA-1510P
Insert a Kensington lock into the device's lock slot to
secure the DBA-1510P in place.
Figure 9: Inserting a Physical Lock
Advertisement
Table of Contents
