Table of Contents
Advertisement
Mounting the Access Point
The DAP-2662 can be mounted on a wall or
ceiling for optimal coverage.
Mounting on a Solid Wall or Ceiling
1.
Use the mounting plate to mark the
location where to drill the holes in the
wall or ceiling.
Figure 5: Mark Location
2.
Drill holes on the markings and place the
included anchors into the drilled holes.
Figure 6: Drill Holes
4
3.
Align and place the mounting plate on
top of the anchors and use the included
screws to secure the mounting plate to
the surface.
Figure 7: Attaching the Mounting Plate
4.
Connect the Ethernet cable and power
adapter (optional) to the device.
5.
Attach the DAP-2662 to the mounting
plate by snapping the device into place
onto the plate and rotating clockwise until
the device locks into place.
6.
Use the Allen key and screw to lock it in
at the top.
Mounting on a Ceiling Crossbar
1.
Clip the two included ceiling brackets onto
a ceiling crossbar. Make sure both brackets
are positioned in line with each other.
Figure 8: Attaching the Ceiling Brackets
Advertisement
Table of Contents
