Related Manuals for D-Link Nuclias DBA-2520P
Summary of Contents for D-Link Nuclias DBA-2520P
- Page 1 Quick Installation Guide Access Point This document will guide you through the basic installation process for your new access point DBA-2520P Documentation is also available on the D-Link website...
-
Page 2: Before You Begin
Additional documentation is also available on the D-Link support website. LED Indicators • D-Link Nuclias Access Point Portal Manual: For additional information and instructions on how to configure the device using the D-Link Nuclias 2.4GH LAN1 LAN2 PWR/Cloud cloud. •... -
Page 3: Interface Connectors
Description device before mounting it. Kensington Slot for inserting a Kensington security If you are unable to connect to the D-Link Nuclias Lock Slot lock. cloud, you may need to manually configure the DBA-2520P using its web user interface (UI). -
Page 4: Mounting The Access Point
2. Open a web browser and type in the default 2. Drill holes on the markings and place the host name of the DBA-2520P and press Enter. included anchors into the drilled holes. The default host name is DBA-2520P-XXXX 3. Align and place the mounting plate on top of the where XXXX represents the last 4 characters anchors and use the included screws to secure of the MAC address listed on the device label... -
Page 5: Troubleshooting
Figure 8: Inserting a Physical Lock from a D-Link-approved power adapter. Connecting an access point to a Power over Ethernet (PoE) device that is not approved by D-Link can damage Reboot/Reset the Access Point the equipment. If necessary, the DBA-2520P can be manually Warning: This product is to be connected only to rebooted or reset to factory default settings. - Page 6 Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 6.41 watts Switched Off: 0.06 watts Federal Communication Commission Interference Statement...
- Page 7 IMPORTANT NOTICE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator and your body. Innovation, Science and Economic Development Canada (ISED) Statement: This Class B digital apparatus complies with Canadian ICES-003.
- Page 8 Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http://www.dlink.com. The D-Link Limited Lifetime Warranty information is available at http://warranty.dlink.com/ Ver.