Table of Contents
Related Manuals for D-Link DBA-X1230P
Summary of Contents for D-Link DBA-X1230P
- Page 1 Quick Installation Guide Access Point This document will guide you through the basic installation process for your new D-Link Nuclias Cloud-Managed AX1800 Access Point DBA-X1230P Documentation is also available on the D-Link website...
-
Page 2: Package Contents
An active Internet connection to connect to the D-Link Nuclias cloud. Figure 2: Rear Connectors • A valid device license. Contact your D-Link Nuclias service provider for more information. # Connector Description Slot to use with the lock plate for inserting... -
Page 3: Powering The Access Point
1. Connect the management PC to the default SSID User Manual for detailed configuration instructions. of the DBA-X1230P. The SSID will be in the format DBA-X1230P-XXX where XXXX represents the last 4 characters of the MAC address listed on the D-Link Nuclias device label located on the bottom of the device. - Page 4 Mounting on a Solid Wall or Ceiling 6. Slide the DBA-X1230P onto the mounting plate. 1. (Optional) Attach the included lock plate to the mounting plate using the included screws. Figure 8: Placing The Access Point Figure 4: Attaching the Lock Plate Mounting on a Ceiling Crossbar 2.
-
Page 5: Troubleshooting
802.3at compliant source, or from a If the lock plate was attached, insert a lock through D-Link-approved power adapter. Connecting an access the device’s lock slot to secure the DBA-X1230P to the point to a Power over Ethernet (PoE) device that is not mounting plate. -
Page 6: Federal Communication Commission Interference Statement
Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 7.27 watts Switched Off: 0.06 watts Federal Communication Commission Interference Statement... -
Page 7: Radiation Exposure Statement
IMPORTANT NOTICE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23.7cm between the radiator and your body. Innovation, Science and Economic Development Canada (ISED) Statement: This Class B digital apparatus complies with Canadian ICES-003. - Page 8 Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http://www. dlink.com. The D-Link Limited Lifetime Warranty information is available at http://warranty.dlink.com/...
- Page 9 Ver. 1.00(WW)_90x130 2021/02/02...