Table of Contents
Advertisement
Programming tracks
You may store up to 16 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROGRAM to
activate programming (or PROG on the remote
control).
➜ Display shows Pr:01, indicating the start of
the program. PROGRAM appears.
2
Press digits 0 - +10 on remote control or
4 or ¢ to select your desired track. (See
Selecting a different track)
3
Press PROGRAM to store the desired track
number.
➜ Display shows Pr:02 (up to 16 in sequence),
indicating the next program location available.
4
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
5
To play your program, press CD •É Å .
Helpful hints:
– If you store more than 16 tracks, the display will
st
show the 1
track in the program. At this time, you
can still store a new track, but the new track will
st
replace the 1
track in the program.
To review the program
● In the stop position, press repeatedly
PROGRAM to see your stored track numbers.
Erasing the program
● You can erase the contents of the memory by:
– Opening the CD door;
– Pressing STOP twice during playback and
once in the stop position.
➜ PROGRAM disappears.
CD Operation
Different play modes: REPEAT,
RANDOM and INTRO
You can select and change the various play
modes before or during playback, and combine
the REPEAT or INTRO modes with PROGRAM.
– plays the current track continuously.
REPEAT
REPEAT – repeats the entire disc/program.
RANDOM – tracks of the entire disc are
played in random order.
REPEAT RANDOM – repeats the entire CD
in random order.
INTRO – Each track in the disc/program plays
10 seconds in sequence.
1
To select play modes, press once or more
PRESET•REPEAT or/and RANDOM, or
INTRO.
2
Press CD •É Å to start playback if in the stop
position.
3
To return to normal playback, press
PRESET•REPEAT, RANDOM or INTRO
repeatedly until the various modes are no longer
displayed.
➜ You can also open the CD door to cancel
your play mode.
Helpful hints:
– In the program mode, you will exit the program
by pressing RANDOM. To return to the program,
press PROGRAM in the stop position.
– RANDOM mode is cancelled if you press
PROGRAM in the stop position.
15
Advertisement
Table of Contents
