Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks; Erasing The Programme - Philips FWM996 User Manual

CD/MP3-CD/WMA Operations
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
.................. plays the current track
continuously
ALL ........ repeats the entire disc/
programme
ALL
................................. repeats the entire disc
continuously in random order
................... tracks of the entire disc are
played in random order
1
To select your play mode, press the MODE
button before or during playback until the display
shows the desired function.
2
Press 2; to start playback if in the STOP
position.
➜
If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the MODE
button until or
● You can also press 9 to cancel your play mode.

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
"Loading discs").
2
Press DISC 1/2/3 (or CD 1/2/3 on the remote
control) to select a disc.
3
In stop mode, press PROG/CLOCK (or
PROGRAM on the remote control) to start
programming.
➜
star ts flashing.
PROG
4
Press S / T (or TITLE +/- (í/ë) on
the remote control) repeatedly to select the
desired track.
●
For MP3/WMA disc, press ALBUM/PRESTE -
/+ (or ALBUM +/- (à / á) on the remote
control) and S / T (or TITLE +/- (í/
ë) on the remote control) to select the
desired album and title for programming.
18
is no longer displayed.
5
Press PROG/CLOCK (or PROGRAM on
the remote control) to store the track.
6
To end programming, press 9 once.
➜
stays and the programme mode
PROG
remains active.
7
To star t programme play, press 2;.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If you attempt to programme more than 40
tracks, "PROGRAM FULL" is displayed.
– During programming, if no button is pressed
within 90 seconds, the system will exit the
programme mode automatically.
To review the programme
●
Stop playback and press S / T (or TITLE
+/- (í/ë) on the remote control) repeatedly.
● To exit review mode, press 9.

Erasing the programme

● Press 9 once when playback is stopped or
twice during playback.
➜ disappears and "PROGRAMME CLEAR"
PROG
is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.