Table of Contents
Advertisement
Installation
Speaker
(right)
Rear connections
Warning:
Never make or change connections with
the mains supply switched on.
A
Speakers connection
Use the supplied speakers only. Using other
speakers can damage the set or the sound
quality will be negatively affected.
●
Connect the cables of the left speaker to L (red
and black) and the cables of the right speaker to
R (red and black) as follows:
Open the clip of the red terminal and fully
insert the stripped portion of the coloured (or
marked) speaker cable into the socket, then
close the clip.
10
AM loop antenna
FM wire antenna
B
1
2
3
Speaker
(left)
Open the clip of the black terminal and fully
insert the stripped portion of the black (or
unmarked) speaker cable into the socket, then
close the clip.
Antennas Connection
AM (MW) antenna
Unfold the loop antenna and if necessary, use
screws (not supplied) to fix it to a flat, hard and
stable place:
1
2
Fit the plug of the loop antenna to AM
ANTENNA as shown below.
Adjust the antenna for optimal reception
(as far as possible from a TV, VCR or radiation
sources)
AC power cord
Advertisement
Table of Contents
