Table of Contents
Advertisement
CD Operation
Discs for playback
This system can playback all digital audio CD,
finalized digital audio CD-Recordable (CDR)
discs and finalized digital audio CD-Rewritable
(CDRW)discs.
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabilizer rings or
disc treatment sheets, etc.
– CDs encoded with copyright
protection technologies by some record
companies may be unplayable by this
system.
Playing discs
1
Press STANDBY-ON to on, then press CD
•É Å to select CD.
2
Press 0PUSH to open the disc door.
➜
Display shows
3
Insert a CD/CD-R(W) with the printed side
facing up and press the CD door gently close.
➜
Display shows - - - - - - and later, the total
playing time and total number of tracks.
4
Press CD •É Å to start playback.
5
To pause playback, press CD •É Å .
Press CD •É Å to resume playback.
6
To stop playback, press STOP (or Ç on the
remot control)
Helpful hints: CD playback will also stop when:
– you open the CD compartment;
– you select TUNER or TAPE;
– the CD has reached the end.
14
.
PUSH
Selecting and searching
Selecting a different track
●
Either briefly press 4 or ¢ once or several
times to skip to the beginning of the current,
previous or subsequent track.
or
Use the digit keys on the remote control to
select the track number directly. e.g.
Track 3: Press 3
Track 10: Press +10 and then, 0
Track 13: Press +10 and then, 3
Track 23: Press +10, +10 and then, 3.
●
In the pause/stop position, press CD •É Å to
start playback.
STANDBY-ON
TUNER
Finding a passage within a track
1
During playback, press and hold 4 or ¢.
➜
The CD plays at a high speed.
2
When you recognize the passage you want,
release 4 or ¢.
➜
Normal playback resumes.
Helpful hints:
– In RANDOM mode, press 4 to return to the
beginning of current track.
TAPE
Advertisement
Table of Contents
