Radio Reception; Tuning To Radio Stations; Storing Preset Radio Stations; To Listen To A Preset Station - Philips FWC5/21M User Manual

Radio Reception

Tuning to radio stations

1
Press STANDBY-ON to on, then press
TUNER•BAND to select TUNER mode.
➜ Display: the waveband, radio station
frequency and if programmed, a preset number
are shown.
2
Press TUNER•BAND once or more to select
your waveband: FM or AM (MW).
3
Press and hold 4 or ¢ until the frequency
in the display starts running.
➜ The radio automatically tunes to a station of
sufficient reception.
➜ If a FM station is received in stereo,
STEREO is shown.
4
Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press 4 or ¢
briefly and repeatedly until optimal reception is
found.
● To tune to a weak FM station, press
STEREO•MONO once or more until MONO
appears on the display.
STANDBY-ON
16

Storing preset radio stations

You can store up to 32 preset radio stations in
the memory (20 FM and 12AM).
1
Tune to your desired radio station (see "Tuning
to radio stations").
2
Press PROGRAM to activate programming.
(or PROG on the remote control)
➜ Display shows: current radio frequency and
CH. -- flashes for you to enter a preset number.
3
Press PRESET•REPEAT to select a preset
number.
4
Press PROGRAM to confirm.
5
Repeat steps 1-4 to store other stations.
Helpful hints:
– You can erase a preset station by storing
another frequency in its place.

To listen to a preset station

● Either press PRESET• REPEAT once or more
until the desired preset station is displayed.
● Or press digits 0 - +10 on remote control to
select the desired preset station. e.g.
Preset 3: Press 3
Preset 10: Press +10 and then, 0
Preset 13: Press +10 and then, 3
Preset 20: Press +10, +10 and then, 0.