Client Mode - TP-Link TL-WA801N User Manual

Chapter 2
7. Follow the step-by-step instructions to complete the configuration.
8. Relocate the access point about
dead zone.
Tip: To maximize the signal strength, refer to the
9. Now, connect your devices to the access point wirelessly or via an Ethernet cable,
and enjoy the internet!
2. 2. 3.

Client Mode

In Client mode, the access point connects your wired devices to a wireless network.
This mode is suitable when you have a wired device with an Ethernet port and no
wireless capability, for example, a smart TV, media player, or game console and you
want to connect it to the internet wirelessly.
Internet
1. Connect the access point according to Step A to D in the diagram.
2. Power on the access point, and wait until the Power (
lit and stable.
3. Use the default SSID and Password printed on the label of the access point to join its
Wi-Fi network.
4. Launch a web browser, and visit http://tplinkap.net. Create a password to log in.
Note:
If the login window does not appear, please refer to the
halfway between your host router and the Wi-Fi
FAQ section.
Host AP's SSID
B
FAQ Section.
Set Up Internet Connection Via Quick Setup Wizard
TV
A
) and Wireless (
Other
OR OR
Wired
Devices
) LEDs are
9