TP-Link TL-WA801N User Manual page 23

Chapter 3
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select Allow the stations specified by any enabled entries in the list to access
filtering rule.
5. Delete all or disable all entries if there are any entries already.
6. Click Add New.
7. Enter the MAC address of the wireless client and select
down list. Add a brief description for the client if needed, and then click Save. The
configured filtering rules should be listed as the picture shows below.
Now, only the wireless client added in the list can access to the wireless network.
Customize Your Network
Enabled in the Status drop-
as the
20