Control Console Assembly - Pride Mobility Victory Series Manual

I V .

CONTROL CONSOLE ASSEMBLY

The control console assembly located on the front section houses all of the controls you need to operate your
Scooter. See figure 11.
WARNING! Do not expose the control console assembly to moisture. In the event that the console
does become exposed to moisture, do not attempt to operate your Scooter until it has dried
thoroughly.
BATTERY CONDITION METER
TURN SIGNAL BUTTON
THROTTLE CONTROL LEVER
(REVERSE)
LIGHT SWITCH
Figure 11. Control Console Assembly
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your Scooter, this meter indicates the approximate
battery voltage strength. For further information on battery charging, see V. “Batteries and Charging.”
Speed Adjustment Dial
This dial allows you to preselect and limit your maximum speed.
n Set the dial between the slowest (image of a tortoise) and fastest (image of a hare) speed settings.
Key Switch
This switch enables you to power up (turn on) and power down (turn off) your Scooter.
n Fully insert the key into the key switch and turn it clockwise to power up your Scooter.
n Turn the key counterclockwise and remove it from the key switch to power down your Scooter.
WARNING! If the key is removed from the key switch while your Scooter is in motion, the electronic
brakes will engage and your Scooter will come to an abrupt stop!
Victory
Y O U R
HAZARD LIGHT SWITCH
V I C T O R Y
HORN BUTTON
4 - 8 MPH SWITCH (VICTORY XL-8)
SPEED ADJUSTMENT DIAL
KEY SWITCH
TURN SIGNAL BUTTON
THROTTLE CONTROL LEVER
(FORWARD)
17